1,956
edits
Changes
Jump to navigation
Jump to search
Line 67:
Line 67: − +
→General Procedure
# Make sure power and air is connected.
# Make sure power and air is connected.
# Attach the ground clamp to the fixed work piece. The surface should be clean and paint free for a good connection. Keep the clamp close to the cut but out of the way.
# Attach the ground clamp to the fixed work piece. The surface should be clean and paint free for a good connection. Keep the clamp close to the cut but out of the way.
# Put on your gloves, jacket, and helmet. You should have no bare skin
# Put on the gloves, jacket, and helmet. You should have no bare skin exposed.
# check the setting on your helmet(see chart for settings).
# check the setting on your helmet(see chart for settings).
# Turn on the plasma cutter power switch.
# Turn on the plasma cutter power switch.