1,956
edits
Changes
Jump to navigation
Jump to search
Line 77:
Line 77: − +
→Troubleshooting
==Troubleshooting==
==Troubleshooting==
If the nozzle stops flowing abrasive most likely the nozzle is clogged. To unclog a nozzle you will need to press the tip up against a solid piece of material and quickly cycle the foot pedal. This process should force air down the siphon tube and blow out any clogs. If this does not resolve the issue you will need to contact the technician.
If abrasive stops flowing most likely the nozzle is clogged. To unclog a nozzle you will need to press the tip flat against a solid piece of material and quickly cycle the foot pedal. This process should force air down the siphon tube and blow out any clogs. Make sure the cabinet door is closed before attempting this. If this does not resolve the issue you will need to contact the technician.
==Maintenance==
==Maintenance==