1,962
edits
Changes
Jump to navigation
Jump to search
→General Procedure
Line 55:
Line 55:
# Tape existing stencil to a piece of acrylic scrap. The stencil will only allow abrasion in the areas desired.
# Tape existing stencil to a piece of acrylic scrap. The stencil will only allow abrasion in the areas desired.
−# Open the cabinet door.
+# Open the cabinet door using the door latch.
# Place stencil/acrylic into sandblast cabinet
# Place stencil/acrylic into sandblast cabinet
−# After placing parts in the cabinet, make sure to secure the door. If the door is left open it will create a cloud of dust that should not be inhaled.
+# After placing parts in the cabinet, make sure to secure the door using the latch. If the door is left open it will create a cloud of dust that should not be inhaled.
−# Turn on the cabinet light and fan switch. The switch is located on the top left of the machine.
+# Turn on the cabinet light and fan switch using the power switch. The switch is located on the top left of the machine.
# Insert your arms into the gloves and position yourself for a clear view into the cabinet.
# Insert your arms into the gloves and position yourself for a clear view into the cabinet.
# Picking up the parts and gun, manually aim where the stencil doesn't cover the acrylic. Do not point the gun at your gloves or the window.
# Picking up the parts and gun, manually aim where the stencil doesn't cover the acrylic. Do not point the gun at your gloves or the window.