Changes

4) Insert the 1/2" R die into the center hole and place the radius pin in the 2nd closest hole.

4) Insert the 1/2" R die into the center hole and place the radius pin in the 2nd closest hole.

5) to be continued.... :)

5) Insert the 6" rod between the radius pin and the die and tighten the cam such that the 1/8" mark is tangent to the die.  It is a tight fit so rocking the radius pin back and forth may be necessary to adjust properly.

 

6) Using the 3/4" wrench

==Safety==

==Safety==

*Keep all hands and fingers out of any pinch points.

*Keep all hands and fingers out of any pinch points.