1,956
edits
Changes
Jump to navigation
Jump to search
Line 67:
Line 67: − + − + − +
→General Procedure
'''Pin Insertion'''
'''Pin Insertion'''
1. Place the plate you will be pressing the pin into on the top of table frame supports.
1. Place the plate you will be pressing the pin into on the top of table frame support blocks.
2. Set the dowel pin into the guide and make sure the table is high enough for the pin to be within an inch of the top of the pin.
2. Set the dowel pin into the guide and make sure the table is high enough for the ram to be within an inch of the top of the pin.
3. If you need to adjust the table remove the safety clips from the pins supporting the table and remove the table plates and assembly pieces. The table plates are heavy so don't drop them.
3. If you need to adjust the table height remove the safety clips from the pins supporting the table and remove the table plates and assembly pieces. The table plates are heavy so don't drop them.
4. To move the table down you will remove the two upper pins and reinstall them in the correct holes below.
4. To move the table down you will remove the two upper pins and reinstall them in the correct holes below.