Changes

Different 3D printers will run with different slicer programs. Typically a program will allow you to edit various parts of the process. One common consideration will be the layer thickness. This is the resolution at which the printer will print at. Each printer will have its own range of resolution. The thinner the layer thickness (higher resolution), the more detail you will get, but the print will be created more slowly. The thicker the layers (lower resolution), the less detail you will receive, but the object will be printed more quickly. Another consideration is support. For objects with overhangs, holes, etc., support will be needed. This will give the printer a surface to print on so that it can continue to build the print layer by layer. Each printer uses supports differently. Some printers have break away support while other have dissolvable support material.

Different 3D printers will run with different slicer programs. Typically a program will allow you to edit various parts of the process. One common consideration will be the layer thickness. This is the resolution at which the printer will print at. Each printer will have its own range of resolution. The thinner the layer thickness (higher resolution), the more detail you will get, but the print will be created more slowly. The thicker the layers (lower resolution), the less detail you will receive, but the object will be printed more quickly. Another consideration is support. For objects with overhangs, holes, etc., support will be needed. This will give the printer a surface to print on so that it can continue to build the print layer by layer. Each printer uses supports differently. Some printers have break away support while other have dissolvable support material.

Keep in mind that '''every print should be recorded in the Job Log''' which every Prototype Lab mentor can access. This allows the Lab to track the material usages and success rates of the printers, as well as recording the prices of every print.  

Keep in mind that '''every print should be recorded in the Job Log'''. This allows the Lab to track the material usages and success rates of the printers, as well as recording the prices of every print. To record your print in the job log, go to the [https://docs.google.com/spreadsheets/d/16fEdNcuvR_GSNV2Emy1P7SpJdetXU7ts9uQy-Ok7dRk/edit?usp=sharing Job Log spreadsheet] and fill out the required fields. A good time to fill it out is right after you have finished setting up a print. 

[[File:3Dsupports.png|250px|thumb|right|Example of an object (blue) printed with supports (white)]]

[[File:3Dsupports.png|250px|thumb|right|Example of an object (blue) printed with supports (white)]]