1,956
edits
Changes
Jump to navigation
Jump to search
Line 58:
Line 58: − + − Insert Text+ − Insert text+ − Insert text+ + + + + + + + +
→Training
==Training==
==Training==
====Overview====
====Operation====
The scroll saw has an oscillating blade with a variable speed control. The thin narrow blade allows you to make tight turns and produce very detailed cuts.
====Demonstration====
====Demonstration====
Demonstrate you can safely setup and operate the scroll saw. You will sketch a letter on a piece of scrap using a pen or pencil. You will follow the lines with the blade and cut out the letter.
====General Procedure====
====General Procedure====
1. Obtain a piece of wood roughly 4" x 4". If the piece of material is too small it will be difficult to hold onto.
2. Adjust the height of the hold down for the thickness of material you are using.
3. Make sure to tension the blade by flipping the blade tension lever. If the blade is not tensioned properly the blade cut will tend to drift and will make it difficult to follow the cut lines.
4. Make sure the material is clear of the blade before turning on the machine.
5.
==Safety==
==Safety==