479
edits
Changes
Jump to navigation
Jump to search
Line 59:
Line 59: − + Line 72:
Line 72: − Insert text+ + + + + + + + + + + + + + + + + + Line 83:
Line 100: − Insert text+ Line 91:
Line 108: − + − + − + + + + + + + + +
→Safety
====General Procedure====
====General Procedure====
# The general procedure and additional knowledge can be found in the video above!
# The general procedure and additional knowledge can be found in the video above! The summary for operation is detailed below, but most of the stuff on the quiz will be in the video.
# Unlock the Blade Guide by turning the knob labeled "Lock" on the back of the machine. This allows you to alter the height of the blade.
# Unlock the Blade Guide by turning the knob labeled "Lock" on the back of the machine. This allows you to alter the height of the blade.
# Set the Blade Guide Height by turning the knob labeled "Adjustment" on the back of the machine. A good height is about 1/4" above the piece you are cutting.
# Set the Blade Guide Height by turning the knob labeled "Adjustment" on the back of the machine. A good height is about 1/4" above the piece you are cutting.
==Safety==
==Safety==
* Safety glasses must be worn when crossing into the shop area marked on the floor.
* No horseplay in the shop.
* Don’t do anything distracting to yourself or others while operating machinery.
* Do not wear any loose clothing, jewelry, or lanyards.
* No hats or open toed shoes.
* Hair will not extend below the collar.
* Do not wear gloves while operating machinery.
* Food or drink is allowed when not operating machinery and it is kept a safe distance away from the machines.
* Do not attempt to operate machinery in the shop that you have not been certified on by GFU engineering personnel.
* Do not argue with volunteers or shop staff. Contact Justin Johnson if you have issues that need to be resolved.
* Do not operate machinery without a shop supervisor or trained volunteer in the shop with you. Never operate equipment alone in the shop.
* The first aid kit is located in the machine shop, next to the woodshop doors.
* If you see a safety violation inform the person immediately and encourage them to comply with the policies
* Keep hand clear of the blade when cutting
* Securely hold stock when cutting
* Do not leave machine running while it is not cutting
* Wait for blade to stop moving before reaching for a small part near the blade.
* Don’t do anything that would require an additional rule to be added to this list.
==Certification==
==Certification==
====General maintenance====
====General maintenance====
The Vertical Bandsaw should always be clean before and after use. If something is not working and needs to be fixed, consult a shop supervisor
====Specific Maintenance Tasks====
====Specific Maintenance Tasks====
!Done By
!Done By
|-
|-
|Sample
|Blade should be waxed
|Sample
|As needed
|Sample
|Ace
|-
|General Cleaning
|Before and after each use
|Student
|-
|Clean inside of machine with vacuum
|Every 2 weeks
|Ace
|}
|}