Changes

{{#evu:https://www.youtube.com/watch?v=oqmJ-dvSMHc}}

{{#evu:https://www.youtube.com/watch?v=oqmJ-dvSMHc}}

==Safety==

==Safety==

* Never wear gloves, long sleeves, jewelry, or have long hair down as all of the can get caught in the rotating portion of the machine.

* Never wear gloves, long sleeves, jewelry, or have long hair down as all of these can get caught in the rotating portion of the machine.

* Make sure to remove the chuck key. Sounds simple but this is probably the most common mistake in the machine shop.  

* Make sure to remove the chuck key. Sounds simple but this is probably the most common mistake in the machine shop.  

==Certification==

==Certification==

==Troubleshooting==

==Troubleshooting==

* Not cutting smoothly or Tool is making excessive noise (chattering) -  

* Not cutting smoothly or Tool is making excessive noise (chattering) - Slow down the feed rate and the amount of material being removed. If the problem persists check the tool to make sure it is not chipped and that it is at the correct height. Ask a shop supervisor for help if the tool is damaged. 

* A small bump remains when facing the end of the material - Adjust the tool height so it is exactly in the center of the material.  

* A small bump remains when facing the end of the material - Adjust the tool height so it is exactly in the center of the material.