1,671
edits
Changes
Jump to navigation
Jump to search
Line 145:
Line 145: − +
→Use Solidworks to design the rear control panel
=== Use Solidworks to design the rear control panel ===
=== Use Solidworks to design the rear control panel ===
The front control panel houses the power switch ([[File:RA11131121.pdf | datasheet]]), powerjack ([[File:KC=301339.pdf| datasheet]]), and USB port. These should all be centered vertically, but distributed aesthetically in the horizontal direction. The USB cable was purchased from [https://www.amazon.com/Printer-Extension-Adapter-Connections-Scanner/dp/B071P2BGK5 | Amazon]. The screw holes are 3.5mm diameter and the centers are 29.6 mm apart. In the middle is a 12.2mm square cutout for the USB plug. If you choose to not design the plate yourself, a Solidworks model is given here: [[File:Mood_Lamp_Rear_Control_Plate.SLDPRT |Mood_Lamp_Rear_Control_Plate.SLDPRT]]. It should look like this when completed.
The front control panel houses the power switch ([[Media:RA11131121.pdf | datasheet]]), powerjack ([[Media:KC=301339.pdf| datasheet]]), and USB port. These should all be centered vertically, but distributed aesthetically in the horizontal direction. The USB cable was purchased from [https://www.amazon.com/Printer-Extension-Adapter-Connections-Scanner/dp/B071P2BGK5 | Amazon]. The screw holes are 3.5mm diameter and the centers are 29.6 mm apart. In the middle is a 12.2mm square cutout for the USB plug. If you choose to not design the plate yourself, a Solidworks model is given here: [[File:Mood_Lamp_Rear_Control_Plate.SLDPRT |Mood_Lamp_Rear_Control_Plate.SLDPRT]]. It should look like this when completed.
[[Image:TV_Mood_Lamp_Rear_Control_Plate.png|500px]]
[[Image:TV_Mood_Lamp_Rear_Control_Plate.png|500px]]