Changes

# Plug in the Ortery Photo table, if it isn't already, and turn the power switch to on. This will not cause a dramatic change in the table but must be done so the software can recognize the it.  

# Plug in the Ortery Photo table, if it isn't already, and turn the power switch to on. This will not cause a dramatic change in the table but must be done so the software can recognize the it.  

# Turn on the computer and log in using your normal George Fox log in.  

# Turn on the computer and log in using your normal George Fox log in.  

# Open up the Ortery Capture software and log in. The username is Cameraman and the password is Nikond70.  

# Open up the Ortery Capture software and log in. The username is Cameraman and the password is Nikond70. The home page should look something like this:[[File:Home screen.png|none|thumb|889x889px]]

# Use the provided USB cable to connect the Camera to the computer.

# Use the provided USB cable to connect the Camera to the computer.

## Make sure when doing this, the camera is off while connecting the camera, and that the software is able to recognize the camera.

## Make sure when doing this, the camera is off while connecting the camera, and that the software is able to recognize the camera.