Changes

====General Procedure====

====General Procedure====

# Connect and turn the one of the dust collectors (shown below) on so we can keep the place clean. Ensure that the restriction plate is “out”.

# Connect and turn the one of the dust collectors (shown below) on so we can keep the place clean. Ensure that the restriction plate is “out”.

[[File:Small Dust Collector Image.jpg|none|thumb|500x500px]]

[[File:Large Dust Collector Image.jpg|none|thumb|500x500px]]

[[File:Small Dust Collector Image.jpg|none|thumb]]

 

[[File:Large Dust Collector Image.jpg|none|thumb]]

# The planer has two feed speeds, typically, the 24 fpm is used whenever possible. For softwood, the 31 FPM setting can be used.

# The planer has two feed speeds, typically, the 24 fpm is used whenever possible. For softwood, the 31 FPM setting can be used.

# Before turning machine on, adjust wheel to feed in work piece and adjust wheel back down to fit snuggly.

# Before turning machine on, adjust wheel to feed in work piece and adjust wheel back down to fit snuggly.