473
edits
Changes
Jump to navigation
Jump to search
Line 50:
Line 50: − + − + − + − #Flip the black switch (inside the yellow rectangle) to turn the bath on+ − + − + − + − −
no edit summary
====General Procedure====
====General Procedure====
# ALWAYS USE SAFETY ATTIRE (see safety for requirements).
# ALWAYS USE SAFETY ATTIRE (see safety for requirements).
[[File:Bath_Controls.jpg|227x227px|thumb|right|
# Bath Controls Panel.
#Flip the black switch (inside the yellow rectangle) to turn the bath on.[[File:Bath_Controls.jpg|227x227px|thumb| # Bath Controls Panel. |link=https://maker-hub.georgefox.edu/wiki/File:Bath_Controls.jpg]]
|link=https://maker-hub.georgefox.edu/wiki/File:Bath_Controls.jpg]]
#Then press the button circled in red to start the heating process.
#The red knob (circled in cyan) should always be set to about 85 degrees Celsius.
#Then press the button circled in red to start the heating process
#Keep the lid shut as often as possible.
#The red knob (circled in cyan) should always be set to about 85 degrees Celsius
#Place the part inside of a mesh bag, tie the strings of the mesh bag to the side handles, allow the part to soak in the bath for several hours.
#Keep the lid shut as often as possible
#*Mesh bags are located in the small drawer next to the sink.
#Place the part inside of a mesh bag, tie the strings of the mesh bag to the side handles, allow the part to soak in the bath for several hours
#*Mesh bags are located in the small drawer next to the sink
''When removing parts:''
''When removing parts:''
#If needed, the basket can be lifted out and removed so that parts can be sifted through in the air instead of the solution. If you do remove basket, removed the lid first and place it in the sink. Next, lift the basket, let it drain above the bath so that it drips into the bath, then once it is barley dripping, the basket can be transferred to the sink.
#If needed, the basket can be lifted out and removed so that parts can be sifted through in the air instead of the solution. If you do remove basket, removed the lid first and place it in the sink. Next, lift the basket, let it drain above the bath so that it drips into the bath, then once it is barley dripping, the basket can be transferred to the sink.