473
edits
Changes
Jump to navigation
Jump to search
Line 36:
Line 36: − + + Line 48:
Line 49: − * ALWAYS USE SAFETY ATTIRE.+ − + − *Flip the black switch (inside the yellow rectangle) to turn the bath on+ − *Then press the button circled in red to start the heating process+ − *The red knob (circled in cyan) should always be set to about 85 degrees Celsius+ − *Keep the lid shut as often as possible+ − *Place the part inside of a mesh bag, tie the strings of the mesh bag to the side handles, allow the part to soak in the bath for several hours+ − **Mesh bags are located in the small drawer next to the sink+ − *''When removing parts:''+ − **If needed, the basket can be lifted out and removed so that parts can be sifted through in the air instead of the solution. If you do remove basket, removed the lid first and place it in the sink. Next, lift the basket, let it drain above the bath so that it drips into the bath, then once it is barley dripping, the basket can be transferred to the sink.+ − **Wash the mesh bag and part thoroughly. Use paper towels to dry the part and let the part sit on paper towels and drain for a couple hours. Always inform the part's creator to wash their hands after handling the part and before eating or touching their eyes/face.+ − **Replace the basket and lid.+ + + − Insert text+ + + + + + + Line 83:
Line 92: − + − − The current Ace of the {{PAGENAME}} is '''{{#show: {{PAGENAME}} |?Has ace.Has name}}''' ({{#show: {{PAGENAME}} |?Has ace.Has email address}}). − − ==Safety Procedures== − *Only Prototype Lab Mentors are allowed to use the Bath for safety concerns − *Required safety attire is a lab coat, safety goggles, and heat/chemical protecting gloves − *Only the Ace of the Bath and the Aces of the Prototype Lab (and Justin) are allowed to drain the tank and replenish it with a new solution of diluted Sodium Hydroxide − *Wash your hands after using the bath and after touching parts that have been removed from the bath within the past 24 hours − *All parts that come out of the bath should be washed and left to dry/drain excess fluid for at least an hour − *All spills should be immediately reported to Justin and the Aces of the Prototype Lab − *Follow the MSDS procedure in the event of getting Sodium Hydroxide on your skin, in your eyes, or if you ingest it Line 100:
Line 98: − *[https://www.massetrecovery.com/Pictures11/dc30.pdf Instruction Manual] for the Thermo Haake DL30 Circulating Bath. − **'''How to use bath:'''
no edit summary
Insert terminology here
Insert terminology here
User Manual
==== User Manual ====
[https://www.massetrecovery.com/Pictures11/dc30.pdf Instruction Manual] for the Thermo Haake DL30 Circulating Bath.
==Training==
==Training==
====General Procedure====
====General Procedure====
# ALWAYS USE SAFETY ATTIRE (see safety for requirements).
[[File:Bath_Controls.jpg|227x227px|thumb|right|Bath Controls Panel.|link=https://maker-hub.georgefox.edu/wiki/File:Bath_Controls.jpg]]
[[File:Bath_Controls.jpg|227x227px|thumb|right|
# Bath Controls Panel.
|link=https://maker-hub.georgefox.edu/wiki/File:Bath_Controls.jpg]]
#Flip the black switch (inside the yellow rectangle) to turn the bath on
#Then press the button circled in red to start the heating process
#The red knob (circled in cyan) should always be set to about 85 degrees Celsius
#Keep the lid shut as often as possible
#Place the part inside of a mesh bag, tie the strings of the mesh bag to the side handles, allow the part to soak in the bath for several hours
#*Mesh bags are located in the small drawer next to the sink
''When removing parts:''
#If needed, the basket can be lifted out and removed so that parts can be sifted through in the air instead of the solution. If you do remove basket, removed the lid first and place it in the sink. Next, lift the basket, let it drain above the bath so that it drips into the bath, then once it is barley dripping, the basket can be transferred to the sink.
#Wash the mesh bag and part thoroughly. Use paper towels to dry the part and let the part sit on paper towels and drain for a couple hours. Always inform the part's creator to wash their hands after handling the part and before eating or touching their eyes/face.
#Replace the basket and lid.
==Safety==
==Safety==
*Only Prototype Lab Mentors are allowed to use the Bath for safety concerns
*Required safety attire is a lab coat, safety goggles, and heat/chemical protecting gloves
*Only the Ace of the Bath and the Aces of the Prototype Lab (and Justin) are allowed to drain the tank and replenish it with a new solution of diluted Sodium Hydroxide
*Wash your hands after using the bath and after touching parts that have been removed from the bath within the past 24 hours
*All parts that come out of the bath should be washed and left to dry/drain excess fluid for at least an hour
*All spills should be immediately reported to Justin and the Aces of the Prototype Lab
*Follow the MSDS procedure in the event of getting Sodium Hydroxide on your skin, in your eyes, or if you ingest it
==Certification==
==Certification==
|Sample
|Sample
|Sample
|Sample
|}
|}
==MSDS Knowledge (soon to be switched to SDS)==
==MSDS Knowledge (soon to be switched to SDS)==
*The MSDS is located next to the sink in a bright yellow binder hanging on the wall
*The MSDS is located next to the sink in a bright yellow binder hanging on the wall
==Using the Bath==
==Using the Bath==
*****
*****
**'''What to do if the bath is beeping:'''
**'''What to do if the bath is beeping:'''