473
edits
Changes
Jump to navigation
Jump to search
Line 50:
Line 50: − + − I+ − + − + − + − Insert text+
no edit summary
====General Procedure====
====General Procedure====
# Select a heating element. This is not an exact science, simply slide the mug into the element and make sure it can wrap around it with a snug fit.
# Use the black set screws to secure the heating element into the press and plug it into the controller. Make sure to screw in the plug as well to ensure a good connection.
# Once the heating element is installed you will want to adjust the pressure applied to the mug using the four large pressure adjustment knobs. The pressure should be evenly distributed across the mugs's surface and firm without risk of crushing it.
# Adjust the time and temperature. 305 °F for 15 seconds is recommended as a starting point but feel free to try new things to improve the results. See the image below for details on changing the time and temp. [[File:Mug press temp.png|none|thumb|799x799px]]
#
==Safety==
==Safety==
* Things are muy calinte.
==Certification==
==Certification==