1,947
edits
Changes
Jump to navigation
Jump to search
Line 56:
Line 56: + + + + + Line 80:
Line 85: + + + Line 99:
Line 107: − ====General Procedure==== − − Insert text
no edit summary
Demonstrate you can safely setup the saw and rip a board. You will then proceed to cross cut one of the remaining piece.
Demonstrate you can safely setup the saw and rip a board. You will then proceed to cross cut one of the remaining piece.
====General Procedure====
'''Rip cut'''
1. Ensure that the material you are cutting has at least one straight edge and no nails or foreign objects. The straight edge will slide against the fence when ripping.
1. Ensure that the material you are cutting has at least one straight edge and no nails or foreign objects. The straight edge will slide against the fence when ripping.
12. When the saw cut is complete, press in on the paddle switch to turn off the saw.
12. When the saw cut is complete, press in on the paddle switch to turn off the saw.
'''Cross Cut'''
13. Move the fence off to the side by lifting the brake handle and sliding the fence off to the side.
13. Move the fence off to the side by lifting the brake handle and sliding the fence off to the side.
21. Lower the blade below the table using the crank handle on the front of the machine
21. Lower the blade below the table using the crank handle on the front of the machine
==Safety==
==Safety==