1,947
edits
Changes
Jump to navigation
Jump to search
Line 53:
Line 53: − +
no edit summary
Demonstrate you can safely setup the saw and rip a board. You will then proceed to cross cut one of the remaining piece.
Demonstrate you can safely setup the saw and rip a board. You will then proceed to cross cut one of the remaining piece.
1. Ensure that the material you are cutting has at least one straight edge and no nails or foreign objects. The straight edge will slide against the fence when ripping.
1. Ensure that the material you are cutting has at least one straight edge and no nails or foreign objects. The straight edge will slide against the fence when ripping.<b/r>
2. Measure the width of the board and determine the width of cut.
2. Measure the width of the board and determine the width of cut.
3. Lift the locking handle on the fence and slide the fence to set the width using the scale. Make sure you use the scale for the correct side of the blade.
3. Lift the locking handle on the fence and slide the fence to set the width using the scale. Make sure you use the scale for the correct side of the blade.