479
edits
Changes
Jump to navigation
Jump to search
Line 74:
Line 74: + + + Line 147:
Line 150: − + − # + + − Insert text
→Safety
Using the Voltera to create single-sided boards with NO vias or holes.[[File:voltera_blinky_500.jpg|300x300px|thumb|right|Training board - The Blinky 500]]
Using the Voltera to create single-sided boards with NO vias or holes.[[File:voltera_blinky_500.jpg|300x300px|thumb|right|Training board - The Blinky 500]]
# Suppose you were to make holes...
## This board in particular does not have any holes, so this entire step can be skipped for this procedure, however, these are the steps to take if you need to drill holes in the future.
##
# Ready the Ink
# Ready the Ink
## The ink is most usable when it reaches room temperature, so we have to let it warm up in advance.
## The ink is most usable when it reaches room temperature, so we have to let it warm up in advance.
##Remove the dispenser. Twist the knob clockwise to back off the paste. '''Put it back in the fridge,''' and quit the Voltera app.
##Remove the dispenser. Twist the knob clockwise to back off the paste. '''Put it back in the fridge,''' and quit the Voltera app.
##Unclamp the board from the Voltera. Remember that you are handling a board with wet paste. Clean up!
##Unclamp the board from the Voltera. Remember that you are handling a board with wet paste. Clean up!
##You are now done with the PCB Printer! Refer to the Pick and Place as well as the Reflow Oven wikis for the remainder of the process. The board consists of a button, a 680Ω resistor, and an LED.
##You are now done with the PCB Printer! Refer to the Pick and Place as well as the Reflow Oven wikis for the remainder of the process.
# Components
## The board consists of a button, a 680Ω resistor, and an LED. Attach a fixed 5VDC connection to the + and -, and the LED should illuminate.
==Safety==
==Safety==
==Certification==
==Certification==