473
edits
Changes
Jump to navigation
Jump to search
Line 99:
Line 99: + + + + +
no edit summary
Pausing or Stopping a Print:
Pausing or Stopping a Print:
# To pause a print in the middle of the job, press the knob and it'll pull up a printing menu. There are two options near the bottom, "Stop Print" and "Pause Print". If the print is failing, you definitely want to stop it. If you need to change filament or think you can save the print before it fails anymore, you can pause the print.
# To pause a print in the middle of the job, press the knob and it'll pull up a printing menu. There are two options near the bottom, "Stop Print" and "Pause Print". If the print is failing, you definitely want to stop it. If you need to change filament or think you can save the print before it fails anymore, you can pause the print.
== Safety ==
* Be careful what you touch; the nozzle and filament leaving it are over 200°C which will easily cause burns. Although only 60°C, the build plate should not be touched during printing.
* Keep hands away from the travel rods because they will pinch fingers with ease.
* Support material can be sharp so be careful when removing it.
== Certification ==
== Certification ==