473
edits
Changes
Jump to navigation
Jump to search
Line 39:
Line 39: − + Line 54:
Line 54: − + + + + − [[File:Heat press control panel .jpg|none|frame|'''Figure 1.''' Heat Press Control Panel]] −
no edit summary
* Material - The item on which the graphic is transferred. In many cases this is a t-shirt.
* Material - The item on which the graphic is transferred. In many cases this is a t-shirt.
* Transfer Paper - The clear material on top of the graphic. This should be left on until after the transfer has occurred.
* Transfer Paper - The clear material on top of the graphic. This should be left on until after the transfer has occurred.
<figure-inline><figure-inline class="mw-default-size">[[File:Heat_Press_Terminology_.jpg|922x922px]]</figure-inline></figure-inline>
<figure-inline>[[File:Heat_Press_Terminology_.jpg|710.994x710.994px]]</figure-inline>
==== Manuals ====
==== Manuals ====
==== General Procedure ====
==== General Procedure ====
Adjusting the temperature and Time:
Adjusting the temperature and Time:
# Press the Mode Select button in the center of the Control Panel so that the (SET) and (TEMP) lights located next to the display will illuminate (Figure 1).
# Press the Mode Select button in the center of the Control Panel so that the (SET) and (TEMP) lights located next to the display will illuminate. This process can be seen in Figure 1.
# Press the (+) or (-) button to raise or lower the temperature setting.The LED Display will show changes as you make them.
# Press the (+) or (-) button to raise or lower the temperature setting.The LED Display will show changes as you make them.
# Once you have adjusted the temperature, press the Mode Select button again to advance to Time Mode. The (SET) and (TIME) lights will illuminate.
# Adjust the time in the same manner you adjusted the temperature.
# Select the desired time and push the Mode Select button again to exit. All lights will be off and the press will return to PRINT mode.
#
#
== Certification ==
== Certification ==