473
edits
Changes
Jump to navigation
Jump to search
Line 39:
Line 39: − + Line 50:
Line 50: − + + + + +
no edit summary
* Material - The item on which the graphic is transferred. In many cases this is a t-shirt.
* Material - The item on which the graphic is transferred. In many cases this is a t-shirt.
* Transfer Paper - The clear material on top of the graphic. This should be left on until after the transfer has occurred.
* Transfer Paper - The clear material on top of the graphic. This should be left on until after the transfer has occurred.
[[File:Heat Press Terminology .jpg|center|828x828px|frameless]]
<figure-inline>[[File:Heat_Press_Terminology_.jpg|703.991x703.991px]]</figure-inline>
==== Manuals ====
==== Manuals ====
==== Demonstration ====
==== Demonstration ====
In order to complete this demonstration, it is necessary to have a graphic prepared a
In order to complete this demonstration, it is necessary to have a graphic prepared and as a result will be helpful to first go through the vinyl printer training first. To complete the demonstration, the student will set up the machine and apply a graphic of their choice onto a material of their choice. If the student does not want to choose a graphic or material, a George Fox logo can be downloaded from the George Fox website, printed on a 2" x 2" square, and then be applied to a piece of scrap from the sewing machine.
==== General Procedure ====
==== General Procedure ====
Adjusting the temperature:
# Press the Mode Select button in the center of the Control Panel so that the (SET) and (TEMP) lights located next to the display will illuminate (Figure 1).
#
[[File:Heat press control panel .jpg|none|frame|556.989x556.989px|'''Figure 1.''' Heat Press Control Panel]]
== Certification ==
== Certification ==