2,405
edits
Changes
Jump to navigation
Jump to search
Line 4:
Line 4: + + + + + + Line 10:
Line 16: − + − |Has make= Skat Blast+ − |Has model= 960-DLX Deluxe − − + − The 960-DLX DELUXE Skat Blast Cabinet has become one of "America's Favorites". TWO 90 watt floodlights and big 12" x 33" window for improved, brighter visibility when blasting. Plus, Skat Blast's C-35-M Foot-Pedal-Operated Power Gun and pickup tube system for a more powerful, even blast. Quiet Vac-50 HEPA Vacuum with HEPA Filtration collects 99.97% dust particles down to 0.3 microns. − The current Ace of the {{PAGENAME}} is '''{{#show: {{PAGENAME}} |?Has ace.Has name}}''' ({{#show: {{PAGENAME}} |?Has ace.Has email address}}).<br />+ + + + + + + + + + + − + − * [http://www.skatblast.com/960-dlx-deluxe-cabinet.html Product Page]+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + − = Procedures: =+ − # Put the parts you wish to sandblast into the cabinet+ − # After placing parts in the cabinet, make sure secure the door with latch properly − # Turn on the cabinet light and fan. Switches located……………. − # Locate the power switch and turn on the sandblaster − # Insert your arms into the gloves and position yourself to have a clear view into the cabinet − # Position your foot in the foot pedal mechanism. Once pedal is depressed sand will blast out of the gun − # Picking up the parts and gun, manually aim where you need to clean on the parts − # When finished, turn the machine off − # Before removing parts, wait 5-10 mins for the dust in the cabinet to settle − # Once you remove parts make sure to close cabinet door and power off the light and fan − + + + + + + + + + +
→Certification
|Is used in domain=
|Is used in domain=
|Has name={{PAGENAME}}
|Has name={{PAGENAME}}
|Has make=Skat Blast
|Has model=SC-40
|Has serial number=494660
|Has life expectancy=
|Has year of manufacture or purchase=
|Has replacement cost=
|Has icon=File:Blast Cabinet.png
|Has icon=File:Blast Cabinet.png
|Has icondesc=
|Has icondesc=
|Has imagedesc=
|Has imagedesc=
|Has description=
|Has description=
|Has certification=
|Has certification=https://georgefox.instructure.com/courses/1278
|Has ace=Levi Gibson;lgibson19@georgefox.edu
|Has ace= None
}}
}}
[[{{#show: {{FULLPAGENAME}}|?Has icon|link=none}}|100px|left|top|{{#show: {{FULLPAGENAME}}|?Has icondesc}}]]
[[{{#show: {{FULLPAGENAME}}|?Has icon|link=none}}|140px|left|top|{{#show: {{FULLPAGENAME}}|?Has icondesc}}]]
[[{{#show: {{FULLPAGENAME}}|?Has image|link=none}}|300px|thumb|upright=1.5|{{#show: {{FULLPAGENAME}}|?Has imagedesc}}]]
[[{{#show: {{FULLPAGENAME}}|?Has image|link=none}}|300px|thumb|upright=1.5|{{#show: {{FULLPAGENAME}}|?Has imagedesc}}]]
Make: {{#show: {{PAGENAME}} |?Has make}}
Model: {{#show: {{PAGENAME}} |?Has model}}
Serial Number: {{#show: {{PAGENAME}} |?Has serial number}}
Ace: {{#show: {{PAGENAME}} |?Has ace.Has name}} ({{#show: {{PAGENAME}} |?Has ace.Has email address}}).
Location: {{#show: {{PAGENAME}} |?Is located in facility}}
__TOC__
__TOC__
= Documentation: =
==Safety First==
[[File:Safety First HD2.png|left|150px]]
Here are some safety instructions for the {{PAGENAME}}. Remember... SAFETY FIRST!!!
*Make sure the cabinet door is closed before stepping on the air activation pedal to prevent a dust cloud.
*Keep the activation pedal clear when loading the cabinet to prevent accidental blasting.
*After you are done using the blaster let the dust in the cabinet settle prior to opening the door.
*Inhaling the dust produced by the cabinet is bad for your lungs.
*Never point the nozzle towards your hand or the window in the cabinet.
*Glass beads that fall on the floor around the machine will be very slippery if you step on them.
==Description==
The blast cabinet is very useful for cleaning and prepping materials for painting and welding. The blast cabinet has a working area of 28" x 40" and contains tiny glass bead media in the bottom section. There is a large wire mesh that divides the upper and lower sections of the cabinet. The air passing through the nozzle creates a vacuum and draws the glass beads from the bottom of the machine up into the air stream in the nozzle. The machine requires 80-125 psi shop air. Glass beads are rapidly accelerated into the part you are bead blasting. The beads fall back into the bottom of the cabinet and are recycled through the system.
The beads will wear down the material to bare metal. You can also use the cabinet to bead blast acrylic with a stencil to make frosted looking designs. There are many types of media that can be run in a blast cabinet. With the proper media people create designs in stone and wood. We currently are using glass beads which tend to be less aggressive.
Here is an example of this piece of equipment being used.
{{#evu:https://www.youtube.com/watch?time_continue=4&v=opduG1yIHPE}}
==Documentation==
====Terminology====
Blast Media - The abrasive material used in the blast cabinet.
Foot Pedal - This is the foot actuated air switch to turn on/off the flow of air/blast media.
[[Media:CABINET INSTRUCTIONS.pdf|Blast Cabinet User Manual]]
[[Media:2022 02 24 VAC 50-55 Instructions.pdf|VAC-50 Instructions]]
==Training==
====Operation====
Operating the blast cabinet requires you to have a basic understanding of how the machine works. Our machine uses glass beads, but can handle using other media. Many different types of media are used in industry including but not limited to glass, sand, walnut shells, and soda. Sand is one of the more aggressive media materials and works good on heavy rust. When the machine foot pedal is pressed the air passing through the nozzle creates a vacuum and draws the glass beads from the bottom of the machine up into the air stream in the nozzle. It is very important not to step on the pedal when the cabinet door is open. The door prevents media dust from flying out into the room. It's also very important to only point the nozzle away from the glass and gloves. The nozzle will destroy the glass window protector as well as put holes in the gloves if careless. Always make sure that materials are free from heavy grease and dirt before trying to blast them. There is a vacuum system with a filter attached to the side of the cabinet. This system pulls a vacuum on the cabinet and helps filter the dust created.
====Demonstration====
Demonstrate you can safely setup the blast cabinet and use a stencil to produce a design on acrylic. The stencil will protect certain areas of acrylic from the glass beads. The beads causes the acrylic to have a frosted look.
====General Procedure====
[[File:Blast_Cab.jpg |none|thumb|600x600px]]
# Tape existing stencil to a piece of acrylic scrap. The stencil will only allow abrasion in the areas desired.
# Open the cabinet door using the door latch.
# Place the stencil/acrylic into sandblast cabinet
# Make sure to secure the door using the latch. If the door is left open it will create a cloud of dust that should not be inhaled.
# Turn on the cabinet light and fan with the power switch located on the top left of the machine.
# Insert your arms into the gloves and position yourself for a clear view into the cabinet.
# You may need to hold the corner of the part down while blasting, manually aim where the stencil doesn't cover the acrylic. Do not point the gun at your gloves or the window.
# Position your foot in the foot pedal mechanism. Once the pedal is depressed sand will blast out of the nozzle.
# Keep the nozzle 3 to 4" away from the acrylic and keep the nozzle moving so it keeps a consistent frost pattern.
# Before removing parts, wait 5-10 mins after turning off the power switch. This allows time for the dust in the cabinet to settle.
# Once you remove parts make sure to close the cabinet door and turn the power switch to the off position.
==Certification==
Complete the <strong>Welding Shop - {{PAGENAME}} Module</strong> at the link below to gain access to the {{PAGENAME}}. The Maker Hub Canvas course pertains to all facilities and equipment contained in the Maker Hub; simply complete the quizzes for the facilities/equipment you wish to use in the Maker Hub. Please email <span style="color:blue">makerhub@georgefox.edu</span> if you have any questions.
[https://georgefox.instructure.com/enroll/G7CTPX Maker Hub Canvas Course]
==Troubleshooting==
If abrasive stops flowing most likely the nozzle is clogged. To unclog a nozzle you will need to press the tip flat against a solid piece of material and quickly cycle the foot pedal. This process should force air down the siphon tube and blow out any clogs. Make sure the cabinet door is closed before attempting this. If this does not resolve the issue you will need to contact the technician.
==Maintenance==
====General maintenance====
*The plastic window cover needs to be replaced when it gets damaged by the glass beads. If you notice the window is hazy and difficult see through let the technician know.
*The blast media needs to be replaced/new media added when it looses its abrasive quality. When this happens the time required to remove material will increase dramatically.
= Warnings: =
====Specific Maintenance Tasks====
{| class="wikitable"
!Maintenance Procedure
!Frequency
!Done By
|-
|Nozzle Change
|As Needed
|Ace/Tech
|}