49
edits
Changes
Jump to navigation
Jump to search
mLine 60:
Line 60: − + + +
no edit summary
'''Post-Processing and Reset:'''
'''Post-Processing and Reset:'''
[[File:Removing Parts from Mark II Build Plate.jpg|left|thumb|228x228px|Removing parts from the Mark II build plate.]]
[[File:Removing Parts from Mark II Build Plate.jpg|left|thumb|228x228px|Removing parts from the Mark II build plate.]]
Upon completion of the part, select clear bed on the touchscreen and remove the build plate from the mount. The purge line and tower should be easily removable by hand. For the part itself, take the putty knife found in the Markforged drawer/box and carefully remove the part. This may take quite a bit of force to accomplish. <u>Make sure the blade of the putty knife and your hand will never come into contact if you slip</u> (i.e.: brace the plate on the table and push the knife away from you along the plate). <sup>INSERT IMAGE HERE</sup> Work the knife along the perimeter of the part's attachment to the build plate and avoid prying with the knife when possible. After the part is removed, wash the plate with <u>warm water only</u>. When the plate is clean, dry it with a paper towel and place it back on the mounts.
Upon completion of the part, select clear bed on the touchscreen and remove the build plate from the mount. The purge line and tower should be easily removable by hand. For the part itself, take the putty knife found in the Markforged drawer/box and carefully remove the part. This may take quite a bit of force to accomplish. <u>Make sure the blade of the putty knife and your hand will never come into contact if you slip</u> (i.e.: brace the plate on the table and push the knife away from you along the plate). Work the knife along the perimeter of the part's attachment to the build plate and avoid prying with the knife when possible. After the part is removed, wash the plate with <u>warm water only</u>. When the plate is clean, dry it with a paper towel and place it back on the mounts.
Notes: The plate is ceramic, avoid dropping it. The plate will absorb oil, it is normal to see fingerprints, etc. on the plate.
Notes: The plate is ceramic, avoid dropping it. The plate will absorb oil, it is normal to see fingerprints, etc. on the plate.
<sub>-</sub>
== References ==
== References ==