54
edits
Changes
Jump to navigation
Jump to search
Line 34:
Line 34: − User manual+ Line 74:
Line 74: + Line 86:
Line 87: − +
no edit summary
== Documentation ==
== Documentation ==
[https://knowledgebase.omax.com/protomax/content/accessories-home.htm?tocpath=MANUALS%7CACCESSORY%20%20GUIDES%7C_____0 ProtoMAX Wiki]
# Open the water valve
# Open the water valve
# Fill the tank to the top of the metal ribs
# Fill the tank to the top of the metal ribs
# Check the garnet hopper. If it is low, fill it up.
# Power on the computer and plug in the USB
# Power on the computer and plug in the USB
# Power on the water jet cutter
# Power on the water jet cutter
# Execute a dry run making sure that the nozzle will not collide with anything
# Execute a dry run making sure that the nozzle will not collide with anything
# Flip the orange rubber cone down, run the cut, and watch out for:
# Flip the orange rubber cone down, run the cut, and watch out for:
## Cut pieces floating up; pieces of cut material floating up and getting wedged between the nozzle and other material or clamps could cause a catastrophic failure. Pause the cut if you think this may happen.
## Material excess floating up; pieces of cut material floating up and getting wedged between the nozzle and other material or clamps could cause a catastrophic failure. Pause the cut if you think this may happen.
== Water Jet Precautions ==
== Water Jet Precautions ==