49
edits
Changes
Jump to navigation
Jump to search
mLine 52:
Line 52: − + + +
→Training
Material costs and totals may be viewed in the upper left of the part screen. It's worth noting the dramatic change in cost with addition of Carbon Fiber inlay.
Material costs and totals may be viewed in the upper left of the part screen. It's worth noting the dramatic change in cost with addition of Carbon Fiber inlay.
All Mark II prints should be okay-ed with Justin before being started. Once setup is completed, prints are sent to the printer via the "Print" option. Generally, select the option to start the print from the machine, rather than automatically.
All Mark II prints should be okay-ed with Justin before being started. Once setup is completed and the printer is on, prints are sent to the printer via the "Print" option. Generally, select the option to start the print from the machine, rather than automatically.
'''Print Setup and Run:'''
'''Print Setup and Run:'''
The printer may be turned on with a switch on the rear of the machine. The machine will boot up and may need to update, let it complete this process. Before starting the print, ...
'''Post-Processing and Reset:'''
'''Post-Processing and Reset:'''