1,341
edits
Changes
Jump to navigation
Jump to search
Line 125:
Line 125: − + Line 132:
Line 132: − + − +
→Training
## Remove the conductor, replace the cap, '''and return the conductive ink to the fridge!'''
## Remove the conductor, replace the cap, '''and return the conductive ink to the fridge!'''
## When you reach the "Flip Board," you are done. Quit the Voltera application. <br /> <br />
## When you reach the "Flip Board," you are done. Quit the Voltera application. <br /> <br />
# Baking the Traces
# ''Baking the Traces''
## Switch over to the Reflow Oven. [[File:bake_go_2.jpg|300x300px|none]] <br />
## Switch over to the Reflow Oven. [[File:bake_go_2.jpg|300x300px|none]] <br />
## Power the Reflow Oven on.
## Power the Reflow Oven on.
## '''DANGER: The rails could be HOT! Take caution.''' Place the board securely on the rails. [[File:bake_place.jpg|300x300px|none]] <br />
## '''DANGER: The rails could be HOT! Take caution.''' Place the board securely on the rails. [[File:bake_place.jpg|300x300px|none]] <br />
## Press "Enter" to close the tray. [[File:bake_go.jpg|300x300px|none]] <br />
## Press "Enter" to close the tray. [[File:bake_go.jpg|300x300px|none]] <br />
## The preheat will take 2 minutes. The baking process takes about 30 min. [[File:bake_inside.jpg|300x300px|none]] <br />
## The preheat will take 2 minutes. The baking process takes about 30 min. [[File:bake_inside.jpg|300x300px|none]] [[File:voltera_nick.jpg|300x300px|thumb|right|Wow]]
[[File:voltera_nick.jpg|300x300px|thumb|right|Wow]]
<br /><br />
=== Level 2 ===
=== Level 2 ===
CHANGE this: <s>After completing the Hello World tutorial, you can proceed with making double-sided boards. Voltera has a tutorial called "Punk Console" which walks through creating your own double-sided board. It also shows how to use the V-One drill to make vias and component through-holes.</s>
CHANGE this: <s>After completing the Hello World tutorial, you can proceed with making double-sided boards. Voltera has a tutorial called "Punk Console" which walks through creating your own double-sided board. It also shows how to use the V-One drill to make vias and component through-holes.</s>