Changes

## Reference the [[#Current Inks and Paste|Current Inks and Paste]] for information on the what the PCB lab is currently stocked with.

## Reference the [[#Current Inks and Paste|Current Inks and Paste]] for information on the what the PCB lab is currently stocked with.

## Grab the correct conductive ink from the fridge. It is labeled with a '''green''' sticker.

## Grab the correct conductive ink from the fridge. It is labeled with a '''green''' sticker.

## Set the conductive ink on the table, allowing to begin to warm to room temperature. <br />

## Set the conductive ink on the table, allowing to begin to warm to room temperature. <br /><br />

# ''Software Setup''

# ''Software Setup''

## Download the files for this project [[Media:pcb_printer_level_1.zip|here]].

## Download the files for this project [[Media:pcb_printer_level_1.zip|here]].

## Add the proper conductive ink. This is the same conductive ink you acquired in step 1.3.

## Add the proper conductive ink. This is the same conductive ink you acquired in step 1.3.

## Load the ink file from the project files. This is the Top Layer Gerber file.  

## Load the ink file from the project files. This is the Top Layer Gerber file.  

## Click "Next." <br />

## Click "Next." <br /><br />

# ''Cleaning the Sensors''

# ''Cleaning the Sensors''

## Take a cue tip and dip it into the isopropyl alcohol. The cue tip should be moist, but NOT soaked. Dab the cue tip on a paper towel to dry it slightly.

## Take a cue tip and dip it into the isopropyl alcohol. The cue tip should be moist, but NOT soaked. Dab the cue tip on a paper towel to dry it slightly.