1,341
edits
Changes
Jump to navigation
Jump to search
Line 106:
Line 106: − + + Line 119:
Line 120: +
→Level 1
# ''Priming the Conductor''
# ''Priming the Conductor''
## Ensure 15 minutes have passed before beginning the next step. The dispenser should not be cold to the touch.
## Ensure 15 minutes have passed before beginning the next step. The dispenser should not be cold to the touch.
## EXPLAIN THIS AWFUL PROCESS. TALK ABOUT NOZZLES BREAKING
## '''EXPLAIN THIS AWFUL PROCESS. TALK ABOUT NOZZLES BREAKING'''
## Mount the dispenser.
## Mount the dispenser.
# ''Calibration''
## Click "Advanced." Start with the Z at 0.10 mm and the E at 0 um. Adjust the Voltera to these values.
## Click "Advanced." Start with the Z at 0.10 mm and the E at 0 um. Adjust the Voltera to these values.
## Click "Calibrate."
## Click "Calibrate."
## Wipe the board clean a final time.
## Wipe the board clean a final time.
## Click "Next."
## Click "Next."
# ''Top Layer Print''
## The Voltera will print what is green. Ensure the portion you want to print is selected. Blue lines will not be printed. (Insert pic that i snipped)
## The Voltera will print what is green. Ensure the portion you want to print is selected. Blue lines will not be printed. (Insert pic that i snipped)
## Click "Start." [[File:voltera_laying_ink.jpg|300x300px|thumb|right|Step]]
## Click "Start." [[File:voltera_laying_ink.jpg|300x300px|thumb|right|Step]]