47
edits
Changes
Jump to navigation
Jump to search
Line 55:
Line 55: − + − − ==== Sodium Hydroxide Bath ==== − The Sodium Hydroxide Bath is located in the back of the Prototype Lab, to the right of the sink. The Bath is used to dissolve support material from parts printed on the Dimension and F370, and will only be used by those trained in the Prototype Lab.The Bath uses a mixture of heated Sodium Hydroxide and water, and as such requires safety equipment to operate.
→3 commandments
Safety First is the rule we hold highest of the 3. Given the delicate nature of our machines, and the different chemicals and materials we use in the Prototype lab, this rule applies to both the safety of you, and the machines.
Safety First is the rule we hold highest of the 3. Given the delicate nature of our machines, and the different chemicals and materials we use in the Prototype lab, this rule applies to both the safety of you, and the machines.
Keeping yourself safe in the Prototype Lab is very easy, as there are very few ways to hurt yourself or the machines. However, proper procedure must be followed at all times, from here we will list potential safety hazards not given their own page in the Wiki:
Keeping yourself safe in the Prototype Lab is very easy, as there are very few ways to hurt yourself or the machines. However, proper procedure must be followed at all times
=== 2. Reset the Space ===
=== 2. Reset the Space ===
=== 3. Be Professional ===
=== 3. Be Professional ===