8
edits
Changes
Jump to navigation
Jump to search
Line 54:
Line 54: − +
→Terminology
====Terminology====
====Terminology====
* Engrave - Removes a thin layer of material from the surface of the metal along an established line. This has great accuracy but only produces a thin line.
* Engrave - Removes a thin layer of material from the surface of the metal along an established line. This has great accuracy but only produces a thin line.
* Raster - Very similar to an engrave but a raster is used to engrave a large area by passing over the area repeatedly. This works great for lettering, designs and such but does lose a little accuracy around the edges.
* Raster - Very similar to an engrave but a raster is used to engrave a large area by passing over the area repeatedly. This works great for things like lettering and designs, but it does lose a little accuracy around the edges.
* FabCreator - The software used to set up a cut from a DXF.
* FabCreator - The software used to set up a cut from a DXF.