124
edits
Changes
Jump to navigation
Jump to search
no edit summary
Line 27:
Line 27:
==Safety==
−# Only cut steel and aluminum.
−# Never cut any coated materials
−# Don't attempt to cut with the compressed air off
−# Make sure the vent hood is on and placed near your working area. This will help evacuate the smoke.
−# Arc rays can burn your eyes and skin. Wear a welding helmet and there should be no bare skin exposed.
−# Never walk on the hoses or ground cable as this could cause damage to the machine.
−# Never pull the trigger on the torch unless you are cutting material as this will reduce the life of the nozzle and electrode.
Location: {{#show: {{PAGENAME}} |?Is located in facility}}
Location: {{#show: {{PAGENAME}} |?Is located in facility}}
+
+==Safety First==
+[[File:Safety First HD2.png|left|150px]]
+Here are some safety instructions for the {{PAGENAME}}. Remember... SAFETY FIRST!!!
+* Only cut steel and aluminum.
+* Never cut any coated materials
+* Don't attempt to cut with the compressed air off
+* Make sure the vent hood is on and placed near your working area. This will help evacuate the smoke.
+* Arc rays can burn your eyes and skin. Wear a welding helmet and there should be no bare skin exposed.
+* Never walk on the hoses or ground cable as this could cause damage to the machine.
+* Never pull the trigger on the torch unless you are cutting material as this will reduce the life of the nozzle and electrode.
Line 86:
Line 97:
# Disconnect the ground clamp.
# Disconnect the ground clamp.
# Reset the space!
# Reset the space!
−==Certification==
==Certification==