2,297
edits
Changes
Jump to navigation
Jump to search
Line 85:
Line 85: − + Line 91:
Line 91: − + +
→General Procedure
# Line piece up with drill bit and fasten down onto work table using a clamp or vice. If drilling a through hole, put a piece of FLAT scrap wood under the piece being drilled to avoid a blowout.
# Line piece up with drill bit and fasten down onto work table using a clamp or vice. If drilling a through hole, put a piece of FLAT scrap wood under the piece being drilled to avoid a blowout.
# Turn power on using switch located on the right side of the machine as shown in the picture below. The yellow tab must be in place for the drill to be powered on.[[File:...voyagerthing.png|none|thumb]]
# Turn power on using switch located on the right side of the machine as shown in the picture below. The yellow tab must be in place for the drill to be powered on.[[File:...voyagerthing.png|none|thumb]]
# Now the display screen should be on. Using the buttons adjust the speed to the specific speed needed to cut the materials. '''[Need to show illustration of display screen with description of settings - CZ]'''
# Now the display screen should be on. Using the buttons, adjust the speed to the correct specifications needed to cut the material using the built-in computer. '''[Need to show illustration of display screen with description of settings - CZ]'''
## To use the speed chart:
## To use the speed chart:
### Go to the Menu > Speed Chart.
### Go to the Menu > Speed Chart.
### Select the drill bit size.
### Select the drill bit size.
### Select the work piece material.
### Select the work piece material.
### Confirm the new set speed. 6. The display will return to the default screen with the new speed selected.
### Confirm the new set speed.
### The display will return to the default screen with the new speed selected.
# After getting everything set up, turn the drill press on. (NEVER put your hand or any other body part in the path of the drill)
# After getting everything set up, turn the drill press on. (NEVER put your hand or any other body part in the path of the drill)
# Pull the lever to drill hole. (NEVER move workpiece while drilling a hole)
# Pull the lever to drill hole. (NEVER move workpiece while drilling a hole)