1,947
edits
Changes
Jump to navigation
Jump to search
Line 62:
Line 62: − − 1. Obtain a piece of scrap wood. If the work piece is too small it will be difficult to hold onto and create a dangerous situation by placing your fingers too close to the belt/disc. − − 2. Using a pencil or pen sketch a radius or line onto the edge of your material. − − 3. Make sure the belt and disc are in good shape and secure. − − 4. Connect the dust collector hose to the sander. − − 5. Power on the dust collector and sander. − − 6. Place the material onto the table and slowly feed your material into the belt/disc using both hands for a rigid grip. Make sure your hands/fingers are clear of any moving parts. − − 7. Keep the material moving to prevent too much heat in one spot. − − 8. Keep sanding until you cut the material back to your line. − − 9. When you are finished sanding power down the dust collector and sander. − − 10. Make sure all motion has stopped before cleaning the machine. − − 11. Reset the space.
→General Procedure
[[File:Formech_Controls.JPG|none|thumb|600x600px]]
[[File:Formech_Controls.JPG|none|thumb|600x600px]]
==Safety==
==Safety==