Changes

As for the through hole press and its tools, there any many things that could damage it. Especially tools for small rivet diameter (0.4 and 0.6 mm) are sensitive and require careful handling. The tip of the upper tool and springloaded pin of the bottom tool may not be damaged. Avoid any excessive pressure on both parts! For transport reasons the tip of the lower tool may be hidden inside of the tool body. If so, carefully turn in the headless screw, until the tip shows up again, but still can be pushed into the body again. See also the video on our website for tool changes and adjustments:  

As for the through hole press and its tools, there any many things that could damage it. Especially tools for small rivet diameter (0.4 and 0.6 mm) are sensitive and require careful handling. The tip of the upper tool and springloaded pin of the bottom tool may not be damaged. Avoid any excessive pressure on both parts! For transport reasons the tip of the lower tool may be hidden inside of the tool body. If so, carefully turn in the headless screw, until the tip shows up again, but still can be pushed into the body again. See also the video on our website for tool changes and adjustments:  

<nowiki>http://www.bungard.de/index.php?option=com_content&view=article&id=48&Itemid=65&lang=english</nowiki>

{{#evu:http://www.bungard.de/index.phpoption=com_content&view=article&id=48&Itemid=65&lang=english}}

==Certification==

==Certification==