1,947
edits
Changes
Jump to navigation
Jump to search
Line 71:
Line 71: − + − Building projects out of wood is a fun and time consuming process. It can be both additive and subtractive manufacturing. One of the most used machines in the shop is the table saw. + + − In the Wood Shop, wood is joined together using glue and different types of joints. − − Each machine in the wood shop has its own special purpose and benefits. MIG is fast and much easier to learn than TIG welding. Spot welding is only used with sheet metal. TIG welding produces very clean welds and the heat is more confined to a smaller area. TIG will also allow you to weld very thin metals. − − These are a few steps that will help you be successful in the Wood Shop. − * Always inspect materials for nails or metal. Metal debris in wood will damage the equipment and possibly cause injury to you. − * Gluing end grain together is a very weak joint. − * Make sure the process you are using is correct for your material type. − * Get help handling larger pieces of wood. − * When making dust turn on the dust filtration units. − Here are a couple things to keep in mind: − * Some wood dust can be toxic. Be aware of the type of wood you are working with. − * Blades and cutters are very sharp so always think before touching. − * Be aware of the location of your fingers in relation to blades and cutters. Never let your hands or finger come close to the blade path. − * Be aware of people and what they are doing around you. − * Be aware of what is on the floor around you. Don't trip on dust collector hoses or electrical cords. − * May of the machines that remove material are very load. Wear ear protection when needed. − * If something feels like it could be dangerous ask a supervisor before attempting.
→General Wood Shop Knowledge
If someone acts disgracefully unprofessional to you in the Machine Shop, you are welcome to bring the issue to Justin or Nick's attention.
If someone acts disgracefully unprofessional to you in the Machine Shop, you are welcome to bring the issue to Justin or Nick's attention.
==General Wood Shop Knowledge==
==General Vault Knowledge==
There is a variety of equipment located in the Vault as well as a good supply of electronic components and fasteners. If you need to take any of these items for a project make sure you document the removal by filling out the inventory removal form. You will find the form hanging on a clip board located next to the Tool Room door.