Changes

=Schedule=

=Schedule=

You will need to take the Vault quiz to gain general card access.  The access hours are M-F 9am-6pm via the west card reader. There are 3 doors located in the Vault area. The door leading to the Machine Shop should only be used during open shop hours and you need to have passed the Machine Shop quiz.  Only shop supervisors should be using the Machine Shop door to gain access to the Vault/Tool Room.  The door leading into the Prototype Lab is only for Prototype Lab supervisors or staff.

You will need to take the Vault quiz to gain general card access.  The access hours are M-F 9am-6pm via the west card reader. There are 3 doors located in the Vault area. The door leading to the Machine Shop should only be used during open shop hours and you need to have passed the Machine Shop quiz.  Only shop supervisors should be using the Machine Shop door to gain access to the Vault/Tool Room.  The door leading into the Prototype Lab from the Vault is only for Prototype Lab supervisors or staff.

=Equipment Overview =

=Equipment Overview =

== Canvas Certification ==

== Canvas Certification ==

Before working with any of the equipment in the Vault you will need to take the [https://georgefox.instructure.com/courses/1299 general lab quiz] as well as the specific quiz for each machine you are trying to use.

Complete <strong>{{PAGENAME}} Certification Quiz Module</strong> at the link below to gain access to {{PAGENAME}}. The Maker Hub Canvas course pertains to all facilities and equipment contained in the Maker Hub; simply complete the quizzes for the facilities/equipment you wish to use in the Maker Hub. Please email <span style="color:blue">makerhub@georgefox.edu</span> if you have any questions.

<!-->

<!-->

{{#ask:

{{#ask: