Difference between revisions of "Spot Welder"
Jump to navigation
Jump to search
| Line 23: | Line 23: | ||
== Procedures == | == Procedures == | ||
| − | # | + | # Ensure the material being welded should be clear of any oil or dust |
# Turn on the spot welder | # Turn on the spot welder | ||
# Place the material being welded between the clamps. | # Place the material being welded between the clamps. | ||
Revision as of 15:01, 4 March 2019
Resistance spot welding is a process in which contacting metal surface points are joined by the heat obtained from resistance to electric current. The Miller LMSW-52 Air-Cooled Spot Welder is a lightweight unit that is portable, easy to operate and excellent for welding mild, galvanized or stainless materials.
Documentation
- LMSW-52 spot welder manual [1]
Procedures
- Ensure the material being welded should be clear of any oil or dust
- Turn on the spot welder
- Place the material being welded between the clamps.
- Clamp down on the two pieces of material for no more than 5 seconds.
- Grab workpiece with a set of pliers, and open the clamp.