Difference between revisions of "Spot Welder"
Jump to navigation
Jump to search
| Line 22: | Line 22: | ||
* LMSW-52 spot welder manual [https://www.millerwelds.com/-/media/e50208051cc3492c9016790b303abf4f.pdf] | * LMSW-52 spot welder manual [https://www.millerwelds.com/-/media/e50208051cc3492c9016790b303abf4f.pdf] | ||
| − | == | + | == Procedures == |
| − | + | # The material being welded should be clear of any oil or dust | |
| − | + | # Turn on the spot welder | |
| + | # Place the material being welded between the clamps. | ||
| + | # Clamp down on the two pieces of material for no more than 5 seconds. | ||
| + | # Grab workpiece with a set of pliers, and open the clamp. | ||
<br \><br \><br \><br \><br \> | <br \><br \><br \><br \><br \> | ||
<references /> | <references /> | ||
Revision as of 15:53, 18 February 2019
The Miller LMSW-52 Air-Cooled Spot Welder is a lightweight unit that is portable, easy to operate and excellent for welding mild, galvanized or stainless materials.
Documentation
- LMSW-52 spot welder manual [1]
Procedures
- The material being welded should be clear of any oil or dust
- Turn on the spot welder
- Place the material being welded between the clamps.
- Clamp down on the two pieces of material for no more than 5 seconds.
- Grab workpiece with a set of pliers, and open the clamp.