11
edits
Changes
Jump to navigation
Jump to search
mLine 15:
Line 15: − + Line 59:
Line 59: − *[https://www.itee.uq.edu.au/etsg//filething/get/3156/Speedy-300-Manual-EN.pdf User Guide] Line 118:
Line 117: + + + + + + + + + + + + + Line 177:
Line 189: − +
Grammar. Fixed a plural
|Has model=156F
|Has model=156F
|Has serial number=140801D83D63 / 01411-05631 (Air Filter)
|Has serial number=140801D83D63 / 01411-05631 (Air Filter)
|Has ace=Zach Cogswell: ZCogswell18@georgefox.edu
|Has ace=Zach Cogswell;zcogswell18@georgefox.edu
}}
}}
* '''[[Media:JobControl-Manual-EN.pdf|Job Control Operation Manual]]'''
* '''[[Media:JobControl-Manual-EN.pdf|Job Control Operation Manual]]'''
* '''[[Media:8011-speedy300-manual-en.pdf|Speedy 300 Operation Manual]]'''
* '''[[Media:8011-speedy300-manual-en.pdf|Speedy 300 Operation Manual]]'''
==Training==
==Training==
*Keep an eye on active cuts because fires can be started when cutting wood or acrylic with paper covering.
*Keep an eye on active cuts because fires can be started when cutting wood or acrylic with paper covering.
*If you feel unsure about anything located in the laser cutting procedure make sure to consult the supervisor for assistance.
*If you feel unsure about anything located in the laser cutting procedure make sure to consult the supervisor for assistance.
==Cut List==
===Approved Materials===
* Acrylic
* Wood
* Vegetable tanned leather
===DO NOT CUT===
* Any plastics containing PVC (polyvinyl chloride)
* Chrome tanned leather
* Hardboard (Masonite)
If you want to cut a material not listed here, please talk with the Maker Hub staff.
==Certification==
==Certification==
====General maintenance====
====General maintenance====
To keep the laser cutter running and cutting smoothly, the mirror and lens should be periodically cleaned. This is on top of the general cleaning that should be done to keep the machine dust and scrap free. There is also filters in the exhaust system that must be changed once the activated carbon has been used up.
To keep the laser cutter running and cutting smoothly, the mirror and lens should be periodically cleaned. This is on top of the general cleaning that should be done to keep the machine dust and scrap free. There are also filters in the exhaust system that must be changed once the activated carbon has been used up.
====Specific Maintenance Tasks====
====Specific Maintenance Tasks====