1,947
edits
Changes
Jump to navigation
Jump to search
Line 74:
Line 74: − + − +
→General Procedure
3. Make sure to tension the blade by flipping the blade tension lever. If the blade is not tensioned properly the blade cut will tend to drift and will make it difficult to follow the cut lines.
3. Make sure to tension the blade by flipping the blade tension lever. If the blade is not tensioned properly the blade cut will tend to drift and will make it difficult to follow the cut lines.
4. Make sure the material is clear of the blade before turning on the machine.
4. Make sure the material is clear of the blade and turn on the power switch.
5.
5. Using the blade speed adjustment knob you can set the blade strokes per minute. The EX-21 is capable of producing 400 to 1550 strokes per minute. Normally harder/thicker material will require a slower blade speed. Set the blade around 800 to start with. If you notice burn marks slow down the speed.
==Safety==
==Safety==