2,297
edits
Changes
Jump to navigation
Jump to search
Line 42:
Line 42: − * [https://www.prusa3d.com/original-prusa-i3-mk3/ Product Home Page]+ − * [https://prusa3d.com/downloads/manual/prusa3d_manual_mk3_en_3_04.pdf Prusa i3 MK3 Guide]+ + + Line 115:
Line 117: − + + + +
→User manuals
==== User manuals ====
==== User manuals ====
[[Media:Prusa3d manual mk3 en 3 04.pdf|Prusa 3D Printer User Manual]]
[https://www.prusa3d.com/original-prusa-i3-mk3/ Product Home Page]
==== '''Terminology''' ====
==== '''Terminology''' ====
* Be careful what you touch; the nozzle and filament leaving it are over 200°C which will easily cause burns. Although only 60°C, the build plate should not be touched during printing.
* Be careful what you touch; the nozzle and filament leaving it are over 200°C which will easily cause burns. Although only 60°C, the build plate should not be touched during printing.
* Keep hands away from the travel rods because they will pinch fingers with ease.
* Keep hands away from the travel rods because they will pinch fingers with ease.
* Support material can be sharp so be careful when removing it.
* Support material can be sharp so be careful when removing it.
==Approved Filaments==
* PLA
== Certification ==
== Certification ==