1,341
edits
Changes
Jump to navigation
Jump to search
Line 132:
Line 132: − + + + + + + + + + + + + + − + +
→Level 1
## '''DANGER: The rails could be HOT! Take caution.''' Place the board securely on the rails. [[File:bake_place.jpg|300x300px|none]] <br />
## '''DANGER: The rails could be HOT! Take caution.''' Place the board securely on the rails. [[File:bake_place.jpg|300x300px|none]] <br />
## Press "Enter" to close the tray. [[File:bake_go.jpg|300x300px|none]] <br />
## Press "Enter" to close the tray. [[File:bake_go.jpg|300x300px|none]] <br />
## The preheat will take 2 minutes. The baking process takes about 30 min. [[File:bake_inside.jpg|300x300px|none]]
## The preheat will take 2 minutes. The baking process takes about 30 min. [[File:bake_inside.jpg|300x300px|none]] talk about taking it out of the oven
#''Preparing for Solder Paste''
##Take a barnishing pad from one of the drawers.
##Rub the substrate until the traces have a shine to them, rather than a dull apprentice.
##Replace the barnishing pad back into the drawer
#Clever title for this section
##Take the board back to the Voltera
##Clamp the board into place.
##Open the volteraapp and choose "Solder"
##Choose the proper paste, in this case you want the orange labeled paste
##'''Edit the gerber so that theres no solder paste on pads'''
##'''Like before, clean the calibration switches'''
##Mount the probe, next
<br /><br />
<br /><br />
=== Level 2 ===
=== Lev ===
=== el 2 ===
CHANGE this: <s>After completing the Hello World tutorial, you can proceed with making double-sided boards. Voltera has a tutorial called "Punk Console" which walks through creating your own double-sided board. It also shows how to use the V-One drill to make vias and component through-holes.</s> [[File:voltera_nick.jpg|300x300px|thumb|right|Wow]]
CHANGE this: <s>After completing the Hello World tutorial, you can proceed with making double-sided boards. Voltera has a tutorial called "Punk Console" which walks through creating your own double-sided board. It also shows how to use the V-One drill to make vias and component through-holes.</s> [[File:voltera_nick.jpg|300x300px|thumb|right|Wow]]
* [https://support.voltera.io/hc/en-us/sections/115001111653-Start-Drilling <s>Punk Console Tutorial</s>]
* [https://support.voltera.io/hc/en-us/sections/115001111653-Start-Drilling <s>Punk Console Tutorial</s>]