2,302
edits
Changes
Jump to navigation
Jump to search
Line 54:
Line 54: − + Line 132:
Line 132: + − +
→Certification
====Terminology====
====Terminology====
* Engrave - Removes a thin layer of material from the surface of the metal along an established line. This has great accuracy but only produces a thin line.
* Engrave - Removes a thin layer of material from the surface of the metal along an established line. This has great accuracy but only produces a thin line.
* Raster - Very similar to an engrave but a raster is used to engrave a large area by passing over the area repeatedly. This works great for lettering, designs and such but does lose a little accuracy around the edges.
* Raster - Very similar to an engrave but a raster is used to engrave a large area by passing over the area repeatedly. This works great for things like lettering and designs, but it does lose a little accuracy around the edges.
* FabCreator - The software used to set up a cut from a DXF.
* FabCreator - The software used to set up a cut from a DXF.
==Certification==
==Certification==
Complete the <strong>Machine Shop - {{PAGENAME}} Module</strong> at the link below to gain access to the {{PAGENAME}}. The Maker Hub Canvas course pertains to all facilities and equipment contained in the Maker Hub; simply complete the quizzes for the facilities/equipment you wish to use in the Maker Hub. Please email <span style="color:blue">makerhub@georgefox.edu</span> if you have any questions.
[https://georgefox.instructure.com/courses/1316 Canvas Course]
[https://georgefox.instructure.com/enroll/G7CTPX Maker Hub Canvas Course]
==Troubleshooting==
==Troubleshooting==