2,297
edits
Changes
Jump to navigation
Jump to search
Line 4:
Line 4: + + + + + + Line 10:
Line 16: − + − |Has make=Shaper+ − |Has model= S01-NN Origin − |Has serial number=40083933 − Line 30:
Line 33: + + + + + + + + + Line 45:
Line 57: − ==== [https://assets.shapertools.com/manual/Shaper_Origin_Product_Manual.pdf User Manual] ====+ Line 64:
Line 76: − + Line 87:
Line 99: − − ==Safety== − * Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury or damage the machine. − * Always use the dust collection system to keep the dust levels in the wood shop from reaching a dangerous level. − * Always hold onto the router while it is cutting. It is a CNC but it is not fastened to anything and could tip over if the bit catches on the material. − * Cut at an appropriate feed rate. If Origin’s correction range is unable to keep up with your feed rate, move Origin slower, reduce the depth of cut, change your router bit, and/or adjust the spindle speed. − * Adhere work piece elements that may come loose during cutting. When cutting items out of work piece materials, use double sided tape or alternative methods to hold elements down to your workbench and/or spoil board. This will prevent items from coming loose when cutting is complete. − +
no edit summary
|Is used in domain=Wood
|Is used in domain=Wood
|Has name={{PAGENAME}}
|Has name={{PAGENAME}}
|Has make=Shaper
|Has model= S01-NN Origin
|Has serial number=40083933
|Has life expectancy=
|Has year of manufacture or purchase=
|Has replacement cost=
|Has icon=File:CNC Hand Router.png
|Has icon=File:CNC Hand Router.png
|Has icondesc=
|Has icondesc=
|Has imagedesc=
|Has imagedesc=
|Has description=
|Has description=
|Has certification=https://foxtale.georgefox.edu/moodle/course/view.php?id=31325
|Has certification=https://georgefox.instructure.com/courses/1272
|Has ace=Needed;Makerhub@georgefox.edu
|Has ace=Needed;Needed
}}
}}
[[{{#show: {{FULLPAGENAME}}|?Has icon|link=none}}|140px|left|top|{{#show: {{FULLPAGENAME}}|?Has icondesc}}]]
[[{{#show: {{FULLPAGENAME}}|?Has icon|link=none}}|140px|left|top|{{#show: {{FULLPAGENAME}}|?Has icondesc}}]]
__TOC__
__TOC__
==Safety First==
[[File:Safety First HD2.png|left|150px]]
* Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury or damage the machine.
* Always use the dust collection system to keep the dust levels in the wood shop from reaching a dangerous level.
* Always hold onto the router while it is cutting. It is a CNC but it is not fastened to anything and could tip over if the bit catches on the material.
* Cut at an appropriate feed rate. If Origin’s correction range is unable to keep up with your feed rate, move Origin slower, reduce the depth of cut, change your router bit, and/or adjust the spindle speed.
* Adhere work piece elements that may come loose during cutting. When cutting items out of work piece materials, use double sided tape or alternative methods to hold elements down to your workbench and/or spoil board. This will prevent items from coming loose when cutting is complete.
==Description==
==Description==
* Collet - The clamp that secures the router bits.
* Collet - The clamp that secures the router bits.
[[Media:Shaper Origin Product Manual.pdf|Handheld CNC Router User Manual]]
==Training==
==Training==
Setting up the Cut Area:
Setting up the Cut Area:
{{#evu:https://www.youtube.com/watch?v=sdsMOPZFMRQ}}
{{#evu:https://www.youtube.com/watch?v=sdsMOPZFMRQ}}
# Remove the router and from its box.
# Remove the router from its box.
# Power on the router buy plugging in the device. Do not flip the switch attached to the spindle motor to the on position.
# Power on the router buy plugging in the device. Do not flip the switch attached to the spindle motor to the on position.
# Place at least three strips of Shaper Tape slightly above the area you want to cut so that the router will be able to orient itself. They do not have to be straight line but do need to be in the same plane.
# Place at least three strips of Shaper Tape slightly above the area you want to cut so that the router will be able to orient itself. They do not have to be straight line but do need to be in the same plane.
# Hit the green button on the handle or press start on the screen to perform the cut.
# Hit the green button on the handle or press start on the screen to perform the cut.
# Reset the space when finished by vacuuming any dust, returning the router to its box, and putting away any scrap material.
# Reset the space when finished by vacuuming any dust, returning the router to its box, and putting away any scrap material.
==Certification==
==Certification==
[https://foxtale.georgefox.edu/moodle/course/view.php?id=31325 Foxtale Course]
[https://georgefox.instructure.com/courses/1272 Canvas Quiz]
==Troubleshooting==
==Troubleshooting==