Changes

See the diagram on page 4 of the [https://maker-hub.georgefox.edu/w/images/0/04/Di-Acro_Hand_Bender.pdf User Manual] for complete terminology and visual reference.

See the diagram on page 4 of the [https://maker-hub.georgefox.edu/w/images/0/04/Di-Acro_Hand_Bender.pdf User Manual] for complete terminology and visual reference.

* Radius pin - The dye that the stock is formed around measured by *shockingly* its radius.  

* Radius pin - The dye that the stock is formed around measured by its radius.  

** The following sizes are available in the maker-hub: 1/8", 3/16", 1/2", 11/16", 1", 1 3/4".

** The following sizes are available in the maker-hub: 1/8", 3/16", 1/2", 11/16", 1", 1 3/4".

* Locking pin - A cam pin used to lock the material against the radius pin. Depending on the application, using a holding pin instead of a locking pin may be easier.

* Locking pin - A cam pin used to lock the material against the radius pin. Depending on the application, using a holding pin instead of a locking pin may be easier.