Changes

Jump to navigation Jump to search
no edit summary
Line 28: Line 28:  
The Form Wash uses isopropyl alcohol to remove resin. It's used to clean parts and the occasional build plate. Tools should be washed by hand using the alcohol squirt bottles.   
 
The Form Wash uses isopropyl alcohol to remove resin. It's used to clean parts and the occasional build plate. Tools should be washed by hand using the alcohol squirt bottles.   
   −
Each wash should be run an average of 10 minutes. This time can be changed based off of the size/structural density of the part, with larger or more complicated parts requiring longer to wash. Do not remove supports for the washing process. After washing, remove the print to let it air dry before running it through the Form Cure.   
+
Each wash should be run an average of 10 minutes. This time can be changed based off of the size/structural density of the part, with larger or more complicated parts requiring longer to wash. Do not remove supports for the washing process. After washing, remove the print to let it air dry before running it through the Form Cure. Each resin has its own recommended setting.   
    
== Form Cure Specifics ==
 
== Form Cure Specifics ==
108

edits

Navigation menu