Changes

==== Final Checks ====

==== Final Checks ====

There are some checks you should always do prior to running a program. Ask yourself the following questions before pressing the start button!

There are some checks you should always do prior to running a program. Ask yourself the following questions before pressing the start button!

1. Is the material securely fastened to the table by vacuum or mechanical means?

1. Is the material securely fastened to the table by vacuum or mechanical means?

2. Is the dust collector turned on?

2. Is the dust collector turned on?

3. Has the zero point been set in the correct location?

3. Has the zero point been set in the correct location?

4. Is the pneumatic line connected to the machine?

4. Is the pneumatic line connected to the machine?

5. Are the correct tools setup in the program and in their proper slot on the machine?

5. Are the correct tools setup in the program and in their proper slot on the machine?

6. Is everyone clear of the machine?

6. Is everyone clear of the machine?

7. Is the dust collection shroud going to collide with the material because I'm cutting beyond 3/4" deep?

7. Is the dust collection shroud going to collide with the material because I'm cutting beyond 3/4" deep?

8. Has the proper program been loaded?

8. Has the proper program been loaded?