Changes

====General Procedure====

====General Procedure====

# To start any new project design, you must first select “Create a new file.”

# To start a new project, you must first select “Create a new file.”

# Next, you will be prompted to input the width, height, and thickness of the material you have chosen for this particular project. Click Ok to move on to the next step.

# Next, you will be prompted to input the width, height, and thickness of the material. Click Ok to move on to the next step.

# Now it’s time to import the vectors.

# Now select "import vector".

# Make sure all the pieces are positioned closely together without overlapping. Once you are satisfied with the layout of the various pieces, you can “pin” them down.

# Make sure all the pieces are close together, but make sure they don't overlap.  

# Working from the inside to the outside, you will begin this next step with the inside cutouts. To do this, hold the shift key and select all of the holes. Once they are all selected, go to Tool Path and select the Profile Tool Path. Choose your cut depth, tool, parameters, and then select OK. Double-check that Inside Cut is also selected, and check the box for Ramp as well.

# Working from the inside to the outside, you will begin this next step with the inside cutouts. To do this, hold the shift key and select all of the holes. Once they are all selected, go to Tool Path and select the Profile Tool Path. Choose your cut depth, tool, parameters, and then select OK. Double-check that Inside Cut is also selected, and check the box for Ramp as well.

# To save the inside cutout tool path, select Calculate and OK.

# To save the inside cutout tool path, select Calculate and OK.