2,297
edits
Changes
Jump to navigation
Jump to search
Line 4:
Line 4: + + + + + Line 12:
Line 17: − + − |Has make=Laguna+ − |Has model=SmartShop II − Line 29:
Line 32: + + + + + + + + + + Line 37:
Line 50: + + Line 53:
Line 68: − + Line 140:
Line 155: − + + + + + + + + + + + + + + + + + + + + + + + + − + − ==== Post Process ==== − + − − ==Safety== − There are multiple hazards you need to be aware of when using the CNC router. − * The tooling is very sharp and spins at over 18,000 RPM. Keep your body parts away from the cutter and spindle. You need fingers for the ring you will get by spring. − * Stay behind the safety line when operating the router. The router is very large and will not stop if you get in its way. − * Materials need to be securely fastened to the table by vacuum or mechanical means. − ** This includes material that could be made loose during the cutting process. Use tabs to secure such material. − * Never attempt to cut a hole the same diameter as the cuter with a down cut force cutter. This will compress the chips and can create a fire due to the air draw of the vacuum table. − * Always wear ear protection when operating the CNC router. + − + Line 186:
Line 215: − + − + − +
→Certification
|Is used in domain=Wood
|Is used in domain=Wood
|Has name={{PAGENAME}}
|Has name={{PAGENAME}}
|Has make=Laguna
|Has model=SmartShop II
|Has serial number= 16124390
|Has serial number= 16124390
|Has life expectancy=
|Has year of manufacture or purchase=
|Has replacement cost=
|Has group=Woodworking
|Has group=Woodworking
|Has icon=File:CNC_router_icon.png
|Has icon=File:CNC_router_icon.png
|Has imagedesc=Laguna CNC Router
|Has imagedesc=Laguna CNC Router
|Has description=
|Has description=
|Has certification=https://foxtale.georgefox.edu/moodle/course/view.php?id=30809
|Has certification=https://georgefox.instructure.com/courses/1215
|Has ace=Luke Roderick;lroderick20@georgefox.edu
|Has ace=David Demaree;ddemaree17@georgefox.edu
}}
}}
[[{{#show: {{FULLPAGENAME}}|?Has icon|link=none}}|140px|left|top|{{#show: {{FULLPAGENAME}}|?Has icondesc}}]]
[[{{#show: {{FULLPAGENAME}}|?Has icon|link=none}}|140px|left|top|{{#show: {{FULLPAGENAME}}|?Has icondesc}}]]
Location: {{#show: {{PAGENAME}} |?Is located in facility}}
Location: {{#show: {{PAGENAME}} |?Is located in facility}}
==Safety First==
[[File:Safety First HD2.png|left|150px]]
There are multiple hazards you need to be aware of when using the CNC router.
* The tooling is very sharp and spins at over 18,000 RPM. Keep your body parts away from the cutter and spindle. You need fingers for the ring you will get by spring.
* Stay behind the yellow/black safety line when operating the router. The router is very large and will not stop if you get in its way.
* Materials need to be securely fastened to the table by vacuum or mechanical means. This includes material that could be made loose during the cutting process. Use tabs to secure such material.
* Never attempt to cut a hole the same diameter as the cuter with a down cut force cutter. This will compress the chips and can create a fire due to the air draw of the vacuum table.
* Always wear ear protection when operating the CNC router.
==Description==
==Description==
Here is an example of this piece of equipment being used.
Here is an example of this piece of equipment being used.
{{#evu:https://www.youtube.com/watch?v=K_uOBg8Kc2k}}
{{#evu:https://www.youtube.com/watch?v=K_uOBg8Kc2k}}
{{#evu:https://www.youtube.com/watch?v=A90hoR7M1Ls&feature=emb_logo}}
{{#evu:https://www.youtube.com/watch?v=2VswxAwtXKk}}
==Documentation==
==Documentation==
*Tool Touch-Off- A process of setting the Z axis height of a tool using the sensor built into the machine.
*Tool Touch-Off- A process of setting the Z axis height of a tool using the sensor built into the machine.
[https://860860.app.netsuite.com/core/media/media.nl?id=660566&c=860860&h=b0bfe5746d263d749d0f User Manual]
[[Media:MCNCSS2 13032015 B&R.pdf|CNC Router User Manual]]
==Training==
==Training==
*Turn on the key switch located near the screen located on the control panel and wait for the PC to boot.
*Turn on the key switch located near the screen located on the control panel and wait for the PC to boot.
*Make sure all of the axis are clear to move.
*Make sure all of the axis are clear to move.
*Select HOME and wait for the machine to move to the 0,0 position. Make sure you are located behind the yellow tape on the floor.
*Select HOME and wait for the machine to move to the 0,0 position. You should never be on the machine side of the yellow/black tape on the floor when the machine is operating.
*To manually load/unload a tool in the spindle you will need to press the green button on the left side of the spindle while holding onto the tool holder OD. To insert the tool press the button and slide the tool holder up into the spindle. To remove a tool press the button and tool will be ejected from the spindle. Do not allow your hands to make contact with the razor sharp cutting tool.
==== Material ====
==== Material ====
Only cut wood when operating this machine unless specific approval has been given by the technician. Acrylic and foam may be cut with approval.
==== End Mills ====
==== End Mills ====
*We have a variety of tooling but the majority of cutting should be done with a 1/4" tool. Talk with the technician while in the design phase.
*Whenever a tool is changed in the tool holder a touch off operation must be performed. This will calculate the distance the tool is sticking out of the holder and prevent damage to the table and your work of art.
==== Final Checks ====
==== Final Checks ====
There are some checks you should always do prior to running a program. Ask yourself the following questions before pressing the start button!
1. Is the material securely fastened to the table by vacuum or mechanical means?
2. Is the dust collector turned on?
3. Has the zero point been set in the correct location?
4. Is the pneumatic line connected to the machine?
5. Are the correct tools setup in the program and in their proper slot on the machine?
6. Is everyone clear of the machine?
7. Is the dust collection shroud going to collide with the material because I'm cutting beyond 3/4" deep?
8. Has the proper program been loaded?
9. Has the Z-zero position been set using the material bed and not the material surface?
==== Cutting ====
==== Cutting ====
Always keep your finger near the stop button when starting your program. Most likely if something goes wrong it will happen early in the process so be ready to stop the machine. If you know the relationship between the brush on the dust shroud and the end of the tool you will have a good idea how deep the tool is when it cuts into the material. It is also very important to know what the program should be doing so you can verify the tool path is correct.
==== Reset the Space ====
==== Reset the Space ====
When you have finished, park the cutting tool back into the storage rack at the end of the table. You will need to remove any material on the table and use the vacuum to clean off any leftover dust and chips. You can use the dust collector or portable vacuum. Make sure to disconnect the air hose and power down the machine with the spindle located off of the table. This will prevent any leaking oil from dripping on the table.
When you have finished, park the cutting tool back into the storage rack at the end of the table. You will need to remove any material on the table and use the vacuum to clean off any leftover dust and chips. You can use the dust collector or portable vacuum. Make sure to disconnect the pneumatic air line and power down the machine with the spindle located off of the table. This will prevent any leaking oil from dripping on the table.
==Certification==
==Certification==
Complete the <strong>Wood Shop - {{PAGENAME}} Module</strong> at the link below to gain access to the {{PAGENAME}}. The Maker Hub Canvas course pertains to all facilities and equipment contained in the Maker Hub; simply complete the quizzes for the facilities/equipment you wish to use in the Maker Hub. Please email <span style="color:blue">makerhub@georgefox.edu</span> if you have any questions.
[https://foxtale.georgefox.edu/moodle/course/view.php?id=30809 Foxtale Course]
[https://georgefox.instructure.com/enroll/G7CTPX Maker Hub Canvas Course]
==Troubleshooting==
==Troubleshooting==
!Done By
!Done By
|-
|-
|Sample
|Cycle Oiler
|Sample
|Monthly
|Sample
|Technician
|}
|}