Changes

== Training ==

== Training ==

=== Bending Steps ===

=== Bending Steps ===

#Ensure that your sheet metal is thinner or equivalent to 14 gauge sheet metal, and ensure that it is less than 48" in width.

#Ensure that your sheet metal is thinner or equivalent to 14-gauge sheet metal, and ensure that it is less than 48" in width.

#If making a bend for a box or a pan, adjust the fingers so that the equivalent width of the fingers is just shorter than your sheet metal.

#If making a bend for a box or a pan, adjust the fingers so that the equivalent width of the fingers is just shorter than your sheet metal.

#Adjust the clamp handle to allow room to insert your work piece.

#Adjust the clamp handle to allow room to insert your work piece.

#Insert your work piece to the line you want to bend, centered in the brake, and clamp your piece securely.

#Insert your work piece to the line you want to bend, centered in the brake, and clamp your piece securely.

#

#Pull up on the bending handle slowly until your piece is bent to the desired angle, and slowly lower the leaf.

== Safety ==

== Safety ==

#Always make sure your hands are out of the way of the fingers and all moving parts.  

#Always make sure your hands are out of the way of the fingers and all moving parts.